Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Technician
    Join Date
    Apr 2013
    Location
    cairns
    Posts
    17
    Rep Power
    23

    3540c turned off while firmware updating

    hey just asking is their anything that you can do if a Toshiba photocopier turns off while firmware updating and when turning it back on, it just turns on for 3 seconds and the turns off again and repeats.

    m/c is a 3540c
    firmware version was 3403

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Jul 2008
    Location
    manchester
    Posts
    289
    Rep Power
    36
    No you'll have to order the firmware jigs from toshiba.These will force update the firmware

  3. #3
    Field Supervisor 1,000+ Posts
    3540c turned off while firmware updating

    TheOwl's Avatar
    Join Date
    Nov 2008
    Posts
    1,734
    Rep Power
    62

    Re: 3540c turned off while firmware updating

    As above.
    Please don't ask me for firmware or service manuals as refusal often offends.

  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Jun 2012
    Location
    Bundaberg Qld.
    Posts
    607
    Rep Power
    32

    Re: 3540c turned off while firmware updating

    Quote Originally Posted by jerryl View Post
    hey just asking is their anything that you can do if a Toshiba photocopier turns off while firmware updating and when turning it back on, it just turns on for 3 seconds and the turns off again and repeats.

    m/c is a 3540c
    firmware version was 3403
    I don't believe Jigs will change anything - you have a Short Circuit, check braided cable from Control Panel to Pcb for pinched wires etc - reseat all PCBs incl RAM - disconnect all addons also, then ensure the Unit boots ok (even if Display shows machine pikkie), before attempting to update FW - and ensure the FW is correct for this MODEL
    .

  5. #5
    Field Supervisor 1,000+ Posts
    3540c turned off while firmware updating

    TheOwl's Avatar
    Join Date
    Nov 2008
    Posts
    1,734
    Rep Power
    62

    Re: 3540c turned off while firmware updating

    Chances are that the machine was turned off accidentally or the power went out in which case, the JIGS will fix everything.
    Please don't ask me for firmware or service manuals as refusal often offends.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here