Need help accessing Toshiba 2830c

[logoballz]

I recently was given a perfect condition Toshiba 2830c estudio.
It's in great shape and has brand new toners.

The problem is that I can't get in to use it

It's asking for a 5 digit code to use and I don't have one.

I was able to power up with 8 & 0 pressed and then enter 263
I used 123456 as an admin pw and it puts me into test mode but then nothing on the screen

I'd like to be able to go in and assign new 5 digit codes to use or even just do away with that restriction.

Anyone here have knowledge of how to get in and use this as a copier, fax, scanner?

I'm downloading the drivers now for printing but am not optimistic that it will let me in once I connect it to my computer.

Any help would be greatly appreciated.

Don

[sdrawkcab]

Press Counter then Dept Management.
enter Admin Password
press Dept Management to enable/disable codes or press Dept Registration to enter a new one.

[Acme]

08-8919 will show you the password. Should be blank by default.
also set 08-8911 to 1 while your in there.

[logoballz]

Where do I enter this from?
The test page or just after I startup with 08?

Thanks for the help

Don

[logoballz]

Press Counter then Dept Management.
enter Admin Password
press Dept Management to enable/disable codes or press Dept Registration to enter a new one.

Counter then Dept Management asks for a PW but 123456 doesn't work there

Don

[Acme]

It should be blank, if not check the 08 I posted and it will show current password

[logoballz]

SUCCESS!!! Thanks gang!

Don