e-250

[weaponx2121]

Is there a way to get the pm support list and jam codes for this machine. I have looked all over the manual and can't find anything. Thanks.

[ivovb]

There is no PM support list but You can printout 05 and 08. In 08 there are some codes giving You idea of PM parts life.
Program > * > # > * > * > 1 step down > set > 1 step down > set

Concerning jam codes they are in same list outputed but displayed by type. You can see last 10 jams in 08 253.

BR

[JustManuals]

This Parts & Service manual and the Service Handbook can now be purchased for $12.77 each and downloaded immediately after payment from:

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[weaponx2121]

OK that helped.. Now how do you get into test mode 10. I go into test mode on the screen but it only goes to 8.. I need to test the sensors but can't find out where function test is.

There is no PM support list but You can printout 05 and 08. In 08 there are some codes giving You idea of PM parts life.
Program > * > # > * > * > 1 step down > set > 1 step down > set

Concerning jam codes they are in same list outputed but displayed by type. You can see last 10 jams in 08 253.

BR