Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Aug 2013
    Location
    Atlanta
    Posts
    95
    Rep Power
    0

    E-305 Z fold to bottom tray with the add on 2 casette feature

    Im working on a e studio 305 that has the add on extra 2 casettes on the bottom they are using ledger paper on the very bottom 11 x 17 first of all it was jamming constintly so i change out the feed tires but before i changed them i notice within the first 4 inches coming out of the exit tires it would have a little 1/2 inch fold in the paper after changing the feed tires the jamming went away but not the Z folding and it only happens to this bottom tray does any one have any ideas or seen this issue if so i could use some imput

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Jun 2012
    Location
    Bundaberg Qld.
    Posts
    607
    Rep Power
    32

    Re: E-305 Z fold to bottom tray with the add on 2 casette feature

    Quote Originally Posted by simonsays View Post
    Im working on a e studio 305 that has the add on extra 2 casettes on the bottom they are using ledger paper on the very bottom 11 x 17 first of all it was jamming constintly so i change out the feed tires but before i changed them i notice within the first 4 inches coming out of the exit tires it would have a little 1/2 inch fold in the paper after changing the feed tires the jamming went away but not the Z folding and it only happens to this bottom tray does any one have any ideas or seen this issue if so i could use some imput
    I would suspect the sensor for T4 - try swapping sensor with T3 and check if error code changes, obtain error list - PO holding 9+Start (List Print) 106 or 107.

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Aug 2013
    Location
    Atlanta
    Posts
    95
    Rep Power
    0

    Re: E-305 Z fold to bottom tray with the add on 2 casette feature

    Quote Originally Posted by canonbundy View Post
    I would suspect the sensor for T4 - try swapping sensor with T3 and check if error code changes, obtain error list - PO holding 9+Start (List Print) 106 or 107.
    i will give that a try is this sensor on the feed unit itself if so i swaped feed units when replacinf feed tires we use rebuilt units and it happened before and after the swap

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Aug 2013
    Location
    Atlanta
    Posts
    95
    Rep Power
    0

    Re: E-305 Z fold to bottom tray with the add on 2 casette feature

    the codes coming up are E030 and E063

  5. #5
    Vulcan Inventor of Death 1,000+ Posts Mr Spock's Avatar
    Join Date
    Aug 2006
    Location
    tampa,fl
    Posts
    2,067
    Rep Power
    63

    Re: E-305 Z fold to bottom tray with the add on 2 casette feature

    e030 = paper in machine at power on.
    e063 = paper size mismatch from tray 3.
    And Star Trek was just a tv show...yeah right!

  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Aug 2013
    Location
    Atlanta
    Posts
    95
    Rep Power
    0

    Re: E-305 Z fold to bottom tray with the add on 2 casette feature

    I dont think it's the reg cluthch because i would imagine itwould happen on all casettes but like i said it's only happening on the botton 4 th drawer. I really need to get this figured out for monday and suggestion would help

  7. #7
    Field Supervisor 500+ Posts
    Join Date
    Jun 2012
    Location
    Bundaberg Qld.
    Posts
    607
    Rep Power
    32

    Re: E-305 Z fold to bottom tray with the add on 2 casette feature

    I like Mr Spocks suggestions.

    The sensors are located in the Lower drop down Door.

  8. #8
    Trusted Tech 50+ Posts
    E-305  Z fold to bottom tray with the add on 2 casette feature

    Mad_Coachman's Avatar
    Join Date
    Jan 2009
    Location
    BALDWIN,NY
    Posts
    99
    Rep Power
    31

    Re: E-305 Z fold to bottom tray with the add on 2 casette feature

    Quote Originally Posted by simonsays View Post
    Im working on a e studio 305 that has the add on extra 2 casettes on the bottom they are using ledger paper on the very bottom 11 x 17 first of all it was jamming constintly so i change out the feed tires but before i changed them i notice within the first 4 inches coming out of the exit tires it would have a little 1/2 inch fold in the paper after changing the feed tires the jamming went away but not the Z folding and it only happens to this bottom tray does any one have any ideas or seen this issue if so i could use some imput
    Replace the vertical transport clutches. I have seen quite a few of these go bad. There are two of them(6LH53742000). You may as well replace the reg clutch(6LE5721000) as long as you're back there.

  9. #9
    Trusted Tech 50+ Posts
    Join Date
    Aug 2013
    Location
    Atlanta
    Posts
    95
    Rep Power
    0

    Re: E-305 Z fold to bottom tray with the add on 2 casette feature

    Quote Originally Posted by canonbundy View Post
    I like Mr Spocks suggestions.

    The sensors are located in the Lower drop down Door.
    ok im gona try that monday morning thanks for the help ill let you know how it goes

  10. #10
    Trusted Tech 50+ Posts
    Join Date
    Aug 2013
    Location
    Atlanta
    Posts
    95
    Rep Power
    0

    Re: E-305 Z fold to bottom tray with the add on 2 casette feature

    Quote Originally Posted by canonbundy View Post
    I like Mr Spocks suggestions.

    The sensors are located in the Lower drop down Door.
    I will be checking this out monday Thanks

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here