Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Sep 2012
    Posts
    9
    Rep Power
    0

    E-Studio 3530c paper feed issue

    IMG_20131021_061247_295.jpgIMG_20131021_061234_994.jpgThe paper is not feeding from the LCF. It doesn't even get to the second tray feed rollers, but jams in the LCF roller. It often makes a grinding sound (clutch?).

    I have attached pics of what paper looks like. Both rollers turn and are buffed, clutches seem to operate well by visual inspection from the back of the machine.

    Now we had the bypass feed also jam. Is this a sensor failure?


  2. #2
    Service Manager 10,000+ Posts
    E-Studio 3530c paper feed issue

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    141

    Exclamation Re: E-Studio 3530c paper feed issue

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com


  3. #3
    Junior Member
    Join Date
    Sep 2012
    Posts
    9
    Rep Power
    0

    Re: E-Studio 3530c paper feed issue

    I have the manual. It's not particularly helpful at this point, as it doesn't cover the LCF at all. Also, it just say to replace the sensor when you get the E190 code (oops, important info there!). But, is the paper feed sensor in the 2nd drawer or the LCF? Where can I order these sensors?


  4. #4
    Junior Member
    Join Date
    Sep 2012
    Posts
    9
    Rep Power
    0

    Re: E-Studio 3530c paper feed issue

    I have ordered a new clutch and will update when it is replaced. In the meantime, we are just using an upper drawer.


  5. #5
    Junior Member
    Join Date
    Sep 2012
    Posts
    9
    Rep Power
    0

    Re: E-Studio 3530c paper feed issue

    OK, I'm a moron. I didn't check the settings for the LCF drawer! Apparently somebody had changed the settings for "Thick" paper. When I reset them to "Plain" it has worked perfectly. Doh!

    I hope that this is helpful for any other newbie morons out there.


  6. #6
    Field Tech 500+ Posts
    E-Studio 3530c paper feed issue

    michaelc's Avatar
    Join Date
    Mar 2011
    Location
    England
    Posts
    588
    Rep Power
    24

    Re: E-Studio 3530c paper feed issue

    Have you checked to make sure the lift tray is level and that the gears which sit to the right of the lcf sep roller are not missing a few teeth?

    It didn't say that I couldn't do it in the manual.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here