Originally Posted by
razzer
hello all. been a while since i have been on. having issues though with a 2830c , E061 and E062 codes from the 2 upper trays(size settings are correct). this machine has the two cassettes and a KD unit. it seems to run fine from the KD unit and from bypass(at least it did when i ran it, but it also intermittently will run ok from the upper trays too.). the sensors seem ok in 03 mode and clutches run also. i am considering possibly the reg sensor or actuator , or 1st tray feed sensor/actuator(next sensor down from registration). or possibly one of the 1st/ 2nd tray high speed or low speed transport clutches. just wondering if anyone has dealt with this type of thing or has any input. finding all these clutches is a bit of a chore in ribbon also. thanks for any help?
Bookmarks