Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Field Supervisor 500+ Posts
    Toshiba Estudio 2500C Hard Drive problem, "Cannot start application"


    Join Date
    Jan 2012
    Location
    Tulsa, Oklahoma
    Posts
    932
    Rep Power
    42

    Toshiba Estudio 2500C Hard Drive problem, "Cannot start application"

    I put a used 3500C hard drive into a 2500C and got the message "Cannot start application" Assuming the problem is placing the hard drive in a different model machine. Is their something I can do to make it work... Thanks so much for any feedback !!

  2. #2
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    96

    Re: Toshiba Estudio 2500C Hard Drive problem, "Cannot start application"

    I would assume the HHD data is different from what it should be (used HDD). Do a 3/C format, and partition, try loading the original firmware for the 3510C series, then working your way up in increments to latest. If this doesn't work try the recovery jigs. These will put the MFP back to working firmware levels, but you will need to load HDD and UI for your jig versions. Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here