203L Image Rotation

[toshibadale]

I have All my 203's doing the same thing. I have a pre-printed picture on the right side of the paper. Install paper face up in tray. I have one full page original on top and 1/2 page on second original (print to the left).
When doing 1 to 2 sided, if you do a set, then hit function clear to do another set, the copies of the second set come out with print over the pre-printed part and the second side upside down.

Any suggestions?

Latest firmware installed.

[canonbundy]

Most RADF's print the 2ND side First - maybe turn paper round & face down for 2 x sided print .

[toshibadale]

Most RADF's print the 2ND side First - maybe turn paper round & face down for 2 x sided print .

That is true, that is why the full page is on top.

Sometimes they do not do this weird thing, it is that when the customer least expects it is when it does it.