plz Help me this problem abt Toshi e203.

[ifback]

Hello everybody.
my machine, it appear service call signal,but when i press 8+C, it doesn't happen. and i still copy normal.

I dont know what happen.everybody have met this problem.
Plz help me
Thank a lot.

--------------------
Welcome to VietNam

[Sbarro]

Provide some more info.

[Mr Spock]

If it is still working then it maybe time for a preventative maintenance. Once the parts are replaced then you will need to reset the values in service mode to reset the message.

[nilsonmorales]

from nchhelp.com or add your contact hotmail nilsonmorales@hotmail.com
saludos desde el salvador

[ifback]

	Quote:			Originally Posted by Mr Spock
	If it is still working then it maybe time for a preventative maintenance. Once the parts are replaced then you will need to reset the values in service mode to reset the message.

let me check PM.thank Mr Spock

and more thing Mr Spock.
I met a trouble with e166.
when i power on.it appears Service Call symbol, but when i press [C]+[8], nothing happen.
After that, I press [1]+[3]+[*]+[power On]. so i can copy normally.
Plz help me.
thank a lot

----------------------
Welcome to VietNam

[muthukumar.mlr]

I Faced This Probleam.u Reset The Preventive Maintenance Code ,it Will Work.203,166 Model Almost Same.

Try This Code;
Switch On The 08 Mode.
Enter 252 Code.
Some Reading Will Display.
After That U Make It Zero.then Press Interrupt Button.
Switch Off And Switch On.
:all The Best:

[ifback]

	Quote:			Originally Posted by muthukumar.mlr
	I Faced This Probleam.u Reset The Preventive Maintenance Code ,it Will Work.203,166 Model Almost Same. Try This Code; Switch On The 08 Mode. Enter 252 Code. Some Reading Will Display. After That U Make It Zero.then Press Interrupt Button. Switch Off And Switch On. :all The Best:

nothing to happen.everything is like old.
Plz help me.
thank

---------------
Welcome to Vietnam