help me - E35 - show code C94

[aalex_bom]

please help me, i have a toshiba E35, today it run but don;t sure,
it problems is photo 3 sheets show C94,
when copier was 1 paper photocopied, fusin still continue to running until turn off, sometime paper jammed at registration roller.
i have service manual
but i don’t know how to do.. help me please.

i try to replace HDD, but only some paper.

thanks for all help me out of a difficulty.

[jawir]

Hi,

Here I have some step for you to follow.

1. turn it off the machine and turn it on again if the error displayed gone, leave it and see what happened
2. if no, check the circuit pattern beween main CPU and MROM is short or opened circuit.
3. Replace the LGC Board if this error occurs frequently.


rgds and good luck!

[aalex_bom]

i have not LGC Board, what other away??
WHERE IS MROM ????

[aalex_bom]

i go into particular s, i turn on copier, please waitting screen show "ready " okey.

sometime:when i press "start"/"Print", fuser begin run and feeder load paper but upto registration roller and stop but fuser continue running.
sometime: when i press "start"/"Print" the copier appear C94.
sometime: the copier printed 1-2 papers,but some second appear erro.

[Sbarro]

It's the "Main CPU is abnormal" what you expect ??

1. Check if the circuit pattern between the main CPU and MROM is short- or open-circuited.
2. Replace the LGC board if this error occurs frequently.

Main ROM
There is no other way.

[aalex_bom]

thank you

[aalex_bom]

i repaired Power Board.
Problem is it, a bit IC was fail.
now my copier running very good.
thanks

[Sbarro]

I see that Power Supply is very often a reason for errors.
A week ago i had E160 with C41/C44 all the time.
Power Supply of course was broken

[aalex_bom]

	Quote:			Originally Posted by Sbarro
	I see that Power Supply is very often a reason for errors. A week ago i had E160 with C41/C44 all the time. Power Supply of course was broken

uhh, i found that, Almost, Toshiba's Copier appear errors with the fewest accuracy for every detail .

[Sbarro]

I can't say , i'm working only(98%) with Toshiba's