e-studio 20 or e-studio 200 Printing from computer

[hrichards]

Sorry for the multiple threads, but the topics are different.

I have a copier with estudio200 on the front cover, when I visit that printer using the web interface, it states on the top estudio20.

I do not know which one I should be asking about because of this.

I was to set up network printing from a computer in the office, I'm not sure how to do it. I went to Toshiba's web site, and founds drivers, I think, for it. When I press the printer button on the copier, it give a list of additional features, so I think I have a GF1110 network card in it.

I started to install the drivers, but I couldn't get past typing in the location or the name of the printer, nothing I put in took.

[Sbarro]

Before installing the driver create a Standard TCP/IP Port with IP of your copier and when you will be asking for settings of this port select "not standard" then change list print to LPR and type in the LPR field "print".
e20 and e200 are almost exactly the same copier. Drivers are the same.
If you have "PRINTER" button active then you have got PCL card installed. Network card you can install without PCL card. So you have got both.
I try to refresh my memory for the web password but ... )
One thing i know the password was hard to remember.

[Sbarro]

I will check the password by tomorrow.

[tsbservice]

sysadm?

[Sbarro]

Yes, it's "sysadm"

[hrichards]

OK, thank you. I'm going to try sysadm today. I beleive I saw this the other day but typed in sysadmin instead.

I'll give you guys an update later today.