-
Controller Starting...Please Wait
I'm having the same problem with my Estudio-810. Can someone point me to the Recovery CD?
Thanks in advance
-
Junior Member
- Rep Power
- 0
e35
E35 use controllers GA1020 and GL1010, the GL hangs from the lower back and the GA is inside up higher on the back left, the cable plugs in on the left for network. When you determine which one you have, repost. The GL1010 uses the same image as the GL1020 posted earlier and uses any standard computer HDD.
-
Senior Tech
100+ Posts
- Rep Power
- 0
I Think 1020 And 1010 They Have Software Not Same
-
Junior Member
- Rep Power
- 0
Ok
I am experienced on this product.
-
Junior Member
- Rep Power
- 0
I'm new here, FIRST POST EVER for me. Easy one I hope.
I was told to check if my 550 has a GL-1020 or a GA-1140 by counting the number of tabs when I push the PRINTER/NETWORK button. I get the "Starting Controller Please Wait" message, but never loads. How do I tell which controller I have? Once I figure that out, I am going to need to need more help I'm sure.
Thanks for any help you can offer.
-Roger
-
Technician
- Rep Power
- 5
i need it for e-studio 550
-
gl1020 recov cd S.O.S.
I'm having the same problem with my Estudio-650. Can someone point me to the gl-1020 Recovery CD?
Giga Thanks !!!!!
-
This Parts - Service & Operator's manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals
Paul@justmanuals.com
-
Junior Member
- Rep Power
- 0
please sent me Recovery and Partion CD for GL-1020
dear all,
I need Recovery and Partion CD for GL-1020
please help me!
thanks.
mail: thanh_tcd@yahoo.com
-
Technician
- Rep Power
- 2
I have the same isue i have tons of HDD but need the utility to load on it.
Please help
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Bookmarks