Toshiba E-Studio 550 GL1020 Controller Issues

Tim C · 04-07-2008

I have this Problem with a Toshiba E-Studio 550.. "Starting Controller Please Wait". Wont come out of wait. Copies fine, Wont print.
I have read it is most likley the 20gb HD causing the failure.

I need help in reinstalling the new hard drive and system software.

Mr Spock · 04-07-2008

Check your pm's.

MUMMIM · 04-09-2008

hi Tim C

i think it wrong OS, you must update OS and recovery for GL 1020.

	Quote:			Originally Posted by Tim C
	I have this Problem with a Toshiba E-Studio 550.. "Starting Controller Please Wait". Wont come out of wait. Copies fine, Wont print. I have read it is most likley the 20gb HD causing the failure. I need help in reinstalling the new hard drive and system software.

mhmsaqer · 04-09-2008

Dear sir,
try to make an image for your HDD in order to use it in the next times.
I've a master copy made by ACRONICS TRUE IMAGE which i use it to make copies on demand.
good luck.

Tim C · 04-09-2008

Thanks for all your suggestions, All is good. New hard drive and software installation took care of the problem

Thanks to Mr Spock for his direction

04-10-2008

	Quote:			Originally Posted by Tim C
	I have this Problem with a Toshiba E-Studio 550.. "Starting Controller Please Wait". Wont come out of wait. Copies fine, Wont print. I have read it is most likley the 20gb HD causing the failure. I need help in reinstalling the new hard drive and system software.

The HDD after you replace ,it pending if you have one preloaded with the software,if not you wil have to partation the hdd with the partation CD and then load the software with the CD using and extrenal CD drive i have the cd's let me know if you need a copy or you can get it from our site.don't forget it is and iso file if you download it email me if you need more info hope this helps
also we have seen this problem also caused by the ram chips....

Rajah · 04-10-2008

	Quote:			Originally Posted by Tim C
	I have this Problem with a Toshiba E-Studio 550.. "Starting Controller Please Wait". Wont come out of wait. Copies fine, Wont print. I have read it is most likley the 20gb HD causing the failure. I need help in reinstalling the new hard drive and system software.

Hi I also am having this problem i have a new hdd to install, but i'm unsure of what to do. I have a recovery disk. do i just put in the hdd and install or do i need to do a special software?

Mr Spock · 04-10-2008

Install the had drive then run the partition cd when that is done run the recovery cd.

Accentcp · 05-22-2008

I need a copy of the software to replace a bad hdd in a gl-1020 can you help.I work primarily on Minolta (23 yrs) I have a client
with a IM6530 version of the e studio 650. He has dumped his HDD
Thanks

06-24-2008

I have this Problem with a Toshiba E-Studio 35.. "Starting Controller Please Wait". Wont come out of wait. Copies fine, Wont print.
I have read it is most likley the 40gb HD causing the failure.

I need help in reinstalling the new hard drive and system software.

Please Mr. Spock, provide me this GL1020 soft. (NT system)

Thanks