when I start copier with 0+8 it show "macine information error plz long press energy saver key" . with 0+5 mode is ok . plz someone help me
Thanks: 0
Likes: 0
Dislikes: 0
when I start copier with 0+8 it show "macine information error plz long press energy saver key" . with 0+5 mode is ok . plz someone help me
What error are you getting?
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
there are no error just show " machine information error long press energy saving key" but it copingOriginally Posted by blackcat4866
What happens when you hold 8+clear? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
we had the same a few years ago on an e720, it would say "machine information error" on the screen & wouldn't enter 08 mode.
the NVRAM & HDD were replaced together to fix the issue.
Regards.
Happiness Is The Road.
Posting Permissions
Reply With Quote
Bookmarks