Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Senior Tech 250+ Posts
    Join Date
    May 2009
    Location
    Phoenix,AZ
    Posts
    333
    Rep Power
    0

    E Studio 451C Network issue

    On a sole printer office network the 451C has disappeared. If I set the IP to dynamic, it assigns some 269.254.XXXXX weird number instead of a 192.168.1.XXX. I tried resetting the NIC with the 08 code. Still no go. I tried a new cable. My laptop hooks right into the network. It gets assigned an IP that is correct. Did it blow up? If I set it to static and assign IP,Dynamic, and subnet, it can't find it. I tried a new cable.
    Please help...this damn thing is in Tonopah, AZ.

  2. #2
    Master Of The Obvious 10,000+ Posts
    E Studio 451C Network issue

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: E Studio 451C Network issue

    Not sure why, but DHCP is not assigning an address to your MFP.

    I would run NetScan to identify an open IP address with the last octet in the high 200's, and assign is to the MFP static. If you can not communicate with that new address there is some restriction at the router, and will require participation of the local IT.
    =^..^=

    Edit: I just noticed that you already tried that. Next, I'd try connecting to my laptop via crossover cable. If you still cannot connect, get yourself a NIC card.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech. 2,500+ Posts NeoMatrix's Avatar
    Join Date
    Nov 2010
    Location
    Sunshine State QLD.
    Posts
    3,514
    Rep Power
    104

    Re: E Studio 451C Network issue

    Sound like the recieve side of you network cable or NIC card is broken.
    Check the RJ45 pins inside the socket to see they are not bent?

    HTH
    Inauguration to the "AI cancel-culture" fraternity 1997...
    •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

  4. #4
    Senior Tech 250+ Posts
    Join Date
    May 2009
    Location
    Phoenix,AZ
    Posts
    333
    Rep Power
    0

    Re: E Studio 451C Network issue

    Unfortunately this machine has no NIC card. It is part of the main board. I am unfamiliar with the cross over cable. I am simply going to bring a small laser network printer with me and see if it will hook up. If it does, it's the damn NIC has gone bad. I will check the connection port.
    With a crossover cable you just hook right into the machine with the static IP?
    Thanks for your help guys.

  5. #5
    Master Of The Obvious 10,000+ Posts
    E Studio 451C Network issue

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: E Studio 451C Network issue

    Quote Originally Posted by yormets View Post
    Unfortunately this machine has no NIC card. It is part of the main board. I am unfamiliar with the cross over cable. I am simply going to bring a small laser network printer with me and see if it will hook up. If it does, it's the damn NIC has gone bad. I will check the connection port.
    With a crossover cable you just hook right into the machine with the static IP?
    Thanks for your help guys.
    Exactly correct. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Field Supervisor 500+ Posts
    Join Date
    Apr 2008
    Location
    Sofia
    Posts
    695
    Rep Power
    42

    Re: E Studio 451C Network issue

    Which 08 code did You use for reset? There are two. Use 693, 1119 is not strong enough... Right after reset do not connect cable, and wait 5-6 min. After that try to set static address and restart the machine using right procedure.

    Did You try to upgrade firmware? It should fail if there is a problem with HDD or Sys board (where the network port is). Can You print via USB?

    BR
    I'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here