Hardware upgrade

[Claudio_]

Dear All.

I did a hardware upgrade on Toshiba e-studio 650. I added an ethernet card and immediately appears print menu and a test page was printed.
I configured it with IP and gateway but I dont ping it at all.
The leds on ethernet card are turned on and seems like have an activity.

Does need any driver for it or something else is going wrong?

Best Regards
Claudio.

[Mr Spock]

Did you change the ip address to static or left as dhcp?
print the confige sheet and ping the ip address on that.

[Claudio_]

Firstly thank you for reply.

The IP address is static.
I printed out the configuration sheet and there I find that the IP and SubnetMask are OK (IP:192.168.12.99 & SubM:255.255.255.0).

Maybe any driver are needed for doing this
If yes, can someone of you tell me how can I find it?