350 better than 450
350 better than 450
Really??
es350 same as es450 only speed is higher.
THe machine has 1.5 million prints. Would you buy one if it worked fine?
Personally, e450 RADF is not so good, moreover additional NIC is require for networking if I'm not wrong...
Last time I got 1 unit of e450 reaching 1.5million, always giving intermittent jam when copy a lots...
Now I still got few units of e352/452 on field, those above 1Mils, machine condition mostly not so good, developer gears worn out, developer tank leaking, toner drive issue...
به نظر من برای چاپ بیش از یک میلیون برگ بهترین انتخاب دستگاه es520 و بالاتر هست.
1.5M prints is a lot, too many. I hope it's a gift/donation because it isn't worth much.
I've seen huge negative counts on another Toshiba eS2500. The EEPROM on the Logic board was corrupt.
In either case I wouldn't spend much time on machines this old. Only if you had an unlimited supply of graveyard parts. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks