Thanks: 
Likes: 
Dislikes: Hi,
im chasing a Toshiba e studio 452 Fuser upper picker fingers holder. They commonly break
Hi,
im chasing a Toshiba e studio 452 Fuser upper picker fingers holder. They commonly break
If it's never been changed, there is a parts revision. Instead of a narrow feature to support the claws, it now extends the whole width of the guide.
There is no photo, but I think this is it:
Toshiba E STUDIO 452 Fuser Exit Guide, Genuine (H6035)
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
The hard bit is not being able to see the photo. The exact part I'm chasing is the plastic that holds the fingers that sit on the upper Fuser roller. Not the one that can lift open with the claws.Originally Posted by blackcat4866
I understand. The part you want is the one that degrades due to heat most commonly. The holders break so you end up with only one or two heat roller claws remaining. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thats the one. Let see if that's the one that precision has
Posting Permissions
Reply With Quote
Bookmarks