xerox wc pro 35 error code 08-155

[ps22sp]

error code 08-155
after took out registration transport and clean the white roller , installed back
by pass tray not working-----
when printing from by pass tray , did not hear the sound of the solenoid energies
pj 10 iot board pin 7 8 or inside bypass tray cable connection
any suggestion are welcome
thanks

[ps22sp]

error code 08-155
after took out registration transport and clean the white roller , installed back
by pass tray not working-----
when printing from by pass tray , did not hear the sound of the solenoid energies
pj 10 iot board pin 7 8 or inside bypass tray cable connection
any suggestion are welcome
thanks

check cable connect with iot board pj 10 it's ok
parts come in solenoid replaced installed new one , it working fine
121e25680 parts #