DC700i external fiery controller

**adeyemi** · 08-17-2015

I reloaded the external fiery controller of this xerox dc700i successfully. But a few minutes after completely booting up and connecting to the machine, it goes on to shut down all by itself. What could be problem here pls?

**Milo Wilson** · 08-17-2015

What is the alpha code on the controller? Right in front of the serial number on the controller.

**adeyemi** · 08-18-2015

Originally Posted by Milo Wilson

What is the alpha code on the controller? Right in front of the serial number on the controller.

Part No: 45067747
Serial No: T00175026
Model: Pro80-05

Thanks

**adriansto** · 08-18-2015

Originally Posted by adeyemi

Part No: 45067747
Serial No: T00175026
Model: Pro80-05

Thanks

Must be something like BT6-xxxxxx and running Win7 Pro as operating system.

For 700 the fiery code is MXT-xxxxx and run WinXP.
You cant upgrade EX fiery for 700 to 700i only reloading the operating system

**InterfaceP** · 08-18-2015

700i should be "BP2" if its an "MMX" it's for a 700.

Why did you need to reload Sys Software? Are you sure it took it?

**adriansto** · 08-18-2015

Originally Posted by InterfaceP

700i should be "BP2" if its an "MMX" it's for a 700.

Why did you need to reload Sys Software? Are you sure it took it?

Scott, we talk here about standalone - external - Fiery, not bustled - integrated one.

**adeyemi** · 08-18-2015

Yes its an external controller, not bustled. The details in the information plate on the body of the controller is as stated above. I will repeat it here again:
Part No: 45067747
Serial No: T00175026
Model: Pro80-05
I re-installed the controller software because it stopped booting up. After re-installing the system and user sw, the controller now boots up completely, lunches command work station but CWS does not connect with the machine. And the controller shuts down all by itself shortly after its full boot up. Pls what can i do to solve this issue.

**adeyemi** · 08-19-2015

I am thinking that the problem is that i used a wrong software version to re-install. To be frank, i'm not sure the version i used because i used copies of the software cd's not well labelled with sw version. Can someone out there advise on the correct sw version and/or (possibly) help out with a copy. Thanks.