does anyone know how to calibrate a phaser 7750 , from PhaserCal you can not , on the front panel lacks the command " Color Calibration " . thank you
does anyone know how to calibrate a phaser 7750 , from PhaserCal you can not , on the front panel lacks the command " Color Calibration " . thank you
Hello ,
Please go google type in what you want to do.
you will get all what you want.
Pro
Proc
see
Procedure:
1.
At the printer’s front panel, select
Printer Setup
, select
Calibration Setup
, select
Calibrate Colors
, then select
Lighten/Darken Colors
.
The Color Reference Page prints. Use this page
to evaluate the lightness/darkness of the
image. The printer's current lightne
ss level is displayed on the page.
a.
Select
Lightness Level
, then press the
OK
button.
b.
Press the
Up Arrow
or
Down Arrow
button to change the value from
-5
(lightest) to
5
(darkest), then press the
OK
button. The Color Reference
Page automatically prints
using the new lightness level.
c.
Repeat Steps a and b until you achieve the desired result.
2.
To complete the procedure, sele
ct one of the following options:
■
Accept Changes
: Saves the new lightness level then
returns to the Calibrate Colors
menu.
■
Discard Changes
: Returns to the Calibrate Colors
menu without saving any
changes.
Balance Colors
There are three methods for balancing colors to
prevent a primary color (cyan, magenta, or
yellow) from overpowering the other colors:
■
PhaserMatch and PhaserCal Software
: Provides the most accurate color balance
adjustment by using instrument-based m
easurements. If using PhaserMatch/PhaserCal
software, it is not necessary to perform either
the Basic Color Balan
ce or Advanced Color
Balance procedures.
■
Basic Color Balance
: Provides a color balance adjustme
nt that is appropriate for most
printing needs. Twelve basic, visual evaluations
are made to adjust the darkness of three
shades of each toner color independently.
■
Advanced Color Balance
: Provides a finer color balance
adjustment than the Basic Color
Balance procedure. Two or more advanced vi
sual evaluations are made to ensure that
equal mixtures of the primary
colors produce a neutral gray.
PhaserMatch and PhaserCal Software
PhaserMatch Color Management and Phaser
Cal Color Calibration software provide
instrument-based color calibratio
n tools. These applications us
e spectrophotometer or scanner
measurements to achieve optimum calibra
tion of your Phaser 7750 printer.
PhaserCal software can be used with any Phaser
7750 Color Laser Printe
r and is supplied with
Phaser 7750DN, 7750GX, and 7750DXF configurations. For more information on
PhaserMatch and PhaserCal software, go to
www.xerox.com/office/infoSMART
. To order
PhaserCal software, go to
www.xerox.com/office/7750supplies
.
Bookmarks