061-341, 061-342, 061-343 error docucolor 240

[vlaros]

Hi,

Today my DC240 started showing alternatively the following errora:
061-341
061-342
061-343
Any ideas on how to fix it?

Thnks

[InterfaceP]

061-341 Y laser control
061-342 M laser control
061-343 C laser control

A little strange it's on all 3. The 240 has 2 ROS (laser) assembly's Y&M and C&K so the error isn't just one, it's on both. Unless you took them out to clean them, in which case I would look at something you did wrong, I wouldn't jump into ripping the printer apart.

First check your drums to see if they have any marks or deep gouges on them. This will cause a short and give these codes.

Second check the connections on the MCU.

[adriansto]

Check the drums. At least one of them is bad.

[vlaros]

Check the drums. At least one of them is bad.

Hey, Thanks for the advise.

Indeed it was a bad color drum which cause all the problems.

All the best to everyone!