Thanks Thanks:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Trusted Tech 50+ Posts
    Join Date
    Feb 2010
    Posts
    69
    Rep Power
    18

    Re: Xerox WorkCentre 7755 error 342-325 (342.325.00) Main Motor Failure

    Thanks, I will check and post back monday.


  2. #12
    Trusted Tech 50+ Posts
    Join Date
    Feb 2010
    Posts
    69
    Rep Power
    18

    Re: Xerox WorkCentre 7755 error 342-325 (342.325.00) Main Motor Failure

    xcopytech had the right solution, the black developer was jammed. Replaced with new and all is good now. Thanks everyone for the input!


  3. #13
    Junior Member
    Join Date
    May 2016
    Location
    Delhi, Delhi
    Posts
    7
    Rep Power
    0

    Re: Xerox WorkCentre 7755 error 342-325 (342.325.00) Main Motor Failure

    Quote Originally Posted by Detonation View Post
    xcopytech had the right solution, the black developer was jammed. Replaced with new and all is good now. Thanks everyone for the input!

    Hello Guys,

    Please help me in regards with above mentioned error codes first code is 342-325 then 394-322.
    main motor is not rotation and machines is not rotating as usual, at starting bypas lifts up half and ibt unit lifts and stuck in half.

    i have tried changing
    1. main motor assembly.
    2. black drum motor assembly.
    3. black developer motor assembly.
    4. waste toner assembly.
    5. 2nd btr drawer complete assembly
    6. all drum motor.
    7. mcu pwb board


  4. #14
    Senior Tech 100+ Posts
    Join Date
    Feb 2011
    Location
    West Palm Beach, Fl.
    Posts
    139
    Rep Power
    17

    Re: Xerox WorkCentre 7755 error 342-325 (342.325.00) Main Motor Failure

    Please re-read what "Xcopytech" said.

    Check the "imaging units" or "Developers Drums" whatever you want to call them, and check for Frozen, Stuck, binding, etc.. and replace whatever ones are bad.

    These are "consumables" !!


  5. #15
    Junior Member
    Join Date
    May 2016
    Location
    Delhi, Delhi
    Posts
    7
    Rep Power
    0

    Re: Xerox WorkCentre 7755 error 342-325 (342.325.00) Main Motor Failure

    Quote Originally Posted by rockdude View Post
    Please re-read what "Xcopytech" said.

    Check the "imaging units" or "Developers Drums" whatever you want to call them, and check for Frozen, Stuck, binding, etc.. and replace whatever ones are bad.

    These are "consumables" !!

    I have a running machines xerox dc 252 with me so I have tried changed all four drums and four developer units from a running machines.
    same problem Ibt unit and bypass tray lifts up half and then struck
    machines is idle no sounds on any assembly (motor ) rotation


  6. #16
    Trusted Tech 50+ Posts
    Join Date
    Feb 2010
    Posts
    69
    Rep Power
    18

    Re: Xerox WorkCentre 7755 error 342-325 (342.325.00) Main Motor Failure

    Could maybe be a problem in the LVPS too? As pretty much all motors should be running on 24V?


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here