I have done the required reset of the fault code in the maintenance menu. It started at position 3 and went to 2 and now 1. Now I am stuck. How do I take out the ITB to reset it to the home position?
Looking for a Xerox 240 Service Manual.
I have done the required reset of the fault code in the maintenance menu. It started at position 3 and went to 2 and now 1. Now I am stuck. How do I take out the ITB to reset it to the home position?
Looking for a Xerox 240 Service Manual.
Hi.
I often cover remote areas and as such I have to deal with many brands that I am often not completely familiar with, Often in such cases it would be benificial to have a code to get a xerox machine going until I can send or return with a new drum . Can you please give me the NVM code and reset proceedure for the models you know. Thank you so much.
Regards ChrisP
Its OK I found this setting NVM 751-448 SET TO 1 continues copying but warns drum needs replacement now.
Ok im getting a little irritated with this thing. First off im trying to run a 10 pages book 11x17 folded stapled, Its on 70lb Titan gloss, I keep getting jams 077-130 Duplex out sensor on jam and 077-118 Duplex feed pre regi sensor on jam. Ive cleaned the whole machine ,and wiped the paper path with some solution that helps with the static issues because that was what i thought was causing it being gloss, Ive also clean all the rollers with rubber roller rejuvenate stuff. Still jams. And now to add to the whole thing my ibt belt keeps moving of center and i cant figure out why. Ive check everything on it and cleaned the cleaning assembly and the reflective patch is still reflective. But after like 100 books i get the 042-326 error and have to recenter my belt. I HAVE to have this job done tonight, well and i still have roughly 300-400 books to go and its been 3 days of all nighters for me and im running to the end of my rope lol. Any help will be greatly appreciated. Thanks Copytechnet Gurus!!!!
lol forgot to mention its a xerox dc250 with a booklet finisher. And im currently running, just very slow and unproductive lol. Again thanks for any advice ill be checking back like every half hour
I have a customer who has Xerox DC 240. The machine had little black spot on BK drum. I have changed 4 brand new Black drum now but I still keep geting those little black spot on drum after I copy about 200 to 300 copies. I can see those spot on my printed pages. Any idea how to stop getting my BK drum dameged.
Sounds weird but I hope it make sense to you guys.
Thank you.
Bookmarks