Results 1 to 6 of 6

Thread: Xerox wc 7346

  1. #1
    Senior Tech 100+ Posts TEC DOG's Avatar
    Join Date
    Sep 2011
    Posts
    113
    Rep Power
    29

    Xerox wc 7346

    Hello Guys!


    I'm Canon tech.Accidentally came in shop Xerox wc 7346.Need to relpace itb cleaner. If it's not rocket science can please anyone explain to me how should I start.Thanks in advance!
    I can make it up with Canon stuff.

  2. #2
    Senior Tech 250+ Posts
    Join Date
    May 2007
    Location
    Wake Forest, NC
    Posts
    379
    Rep Power
    41

    Re: Xerox wc 7346

    Does it actually need replacing or do you want to know how to reset the message?

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jun 2013
    Location
    VA
    Posts
    218
    Rep Power
    26

    Re: Xerox wc 7346

    There is 2 options here either reset due to message on User Interface or your having quality issues. Either way I can walk you thru the process (no worries it is nothing like the IR C3200 ITB replacment).. Time wise is about 30 mins. If an ITB assembly is needed I have one in stock rebuilt for $200 plus shippling with exchange, I am VA. PM me

    Remove Drums


    If finisher is installed disengage from the machine and push to the side.
    -Open finisher door and slide latch towards front of the machine.
    Angle the machine so you have access to the Right Side of the machine.
    There is a small rectangle door with 2 indents on the top. Push down and towards you to open
    This is your ITB area
    Pull the handle (You will see it) until it stops.
    On the left side of the IBT rail you will see a "Latch" that you can move up and down
    Push down while pulling assy out about 3 inches and release that latch
    Continue to pull on assy until it stops again.
    BE CAREFUL AS THIS POINT YOU NOW SEE THE PLASTIC HANDLE ON THE TOP OF ASSY
    Now grab handle and push down the lever, while pulling the assy completely out


    For Re-installation you have to marry up the metal slides on either side.
    If the assy does not go in smoothly at ANY Point REMOVE AND DO NOT FORCE (If you do PM me, ill throw in a coke and a smile with your order of a new assy)
    Try again until you hear the 2 metal clicks

    Viola you have changed it. Sad thing is,I just wrote an entire step by step on a completely different machine and realized it when I got to the re installation procedures


    Hope this helps

  4. #4
    teacher-guide-expert-guru 2,500+ Posts
    Xerox wc 7346

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,943
    Rep Power
    106

    Re: Xerox wc 7346

    Quote Originally Posted by Flash View Post
    Does it actually need replacing or do you want to know how to reset the message?
    Printer have 150K and i already clear the masage.No issues with print quality but however, I would like to change anyway.Is it necessary or can stand for some more time? Me and Tec dog was a little sorry because we accepted Xerox machine for repair.
    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  5. #5
    teacher-guide-expert-guru 2,500+ Posts
    Xerox wc 7346

    zoraldinho's Avatar
    Join Date
    Mar 2008
    Location
    SVN
    Posts
    4,943
    Rep Power
    106

    Re: Xerox wc 7346

    Quote Originally Posted by JrTech View Post
    There is 2 options here either reset due to message on User Interface or your having quality issues. Either way I can walk you thru the process (no worries it is nothing like the IR C3200 ITB replacment).. Time wise is about 30 mins. If an ITB assembly is needed I have one in stock rebuilt for $200 plus shippling with exchange, I am VA. PM me

    Remove Drums


    If finisher is installed disengage from the machine and push to the side.
    -Open finisher door and slide latch towards front of the machine.
    Angle the machine so you have access to the Right Side of the machine.
    There is a small rectangle door with 2 indents on the top. Push down and towards you to open
    This is your ITB area
    Pull the handle (You will see it) until it stops.
    On the left side of the IBT rail you will see a "Latch" that you can move up and down
    Push down while pulling assy out about 3 inches and release that latch
    Continue to pull on assy until it stops again.
    BE CAREFUL AS THIS POINT YOU NOW SEE THE PLASTIC HANDLE ON THE TOP OF ASSY
    Now grab handle and push down the lever, while pulling the assy completely out


    For Re-installation you have to marry up the metal slides on either side.
    If the assy does not go in smoothly at ANY Point REMOVE AND DO NOT FORCE (If you do PM me, ill throw in a coke and a smile with your order of a new assy)
    Try again until you hear the 2 metal clicks

    Viola you have changed it. Sad thing is,I just wrote an entire step by step on a completely different machine and realized it when I got to the re installation procedures


    Hope this helps

    Thank you wery much for this! So if i understand right I need to completely remove IBT to change cleaner? Thanks again.

    p.s. I hope it's not completely different machine.
    Practice makes perfect
    If it ain't broke, don't fix it
    A picture is worth a thousand words
    If you want something done right, you have to do it yourself


  6. #6
    Senior Tech 100+ Posts TEC DOG's Avatar
    Join Date
    Sep 2011
    Posts
    113
    Rep Power
    29

    Re: Xerox wc 7346

    Thanks guys!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here