Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Xerox 550

  1. #1
    Technician
    Join Date
    Aug 2016
    Location
    London
    Posts
    11
    Rep Power
    6

    Xerox 550

    Pls help me on error 117-325, on Xerox 550 and CE is not coming up and the machine seems hanging?

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Aug 2006
    Posts
    1,034
    Rep Power
    37

    Re: Xerox 550

    There is no 117-325 error.
    It could be 116-325.
    Ess fan error

  3. #3
    Senior Tech 250+ Posts Jake2o's Avatar
    Join Date
    Dec 2007
    Location
    Lancashire
    Posts
    309
    Rep Power
    27

    Re: Xerox 550

    Can you post a picture of the error on screen?
    Is it a black screen with red writing or the normal error screen with the error code in the corner?

  4. #4
    Service Manager 1,000+ Posts
    Xerox 550

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    1,774
    Rep Power
    46

    Re: Xerox 550

    Quote Originally Posted by Jibes_Tech View Post
    Pls help me on error 117-325, on Xerox 550 and CE is not coming up and the machine seems hanging?
    Remove battery from ess nvm pwba for 2 minutes. Put it back and try again.
    It is wonderful if you have a previously machine nvm's saving.
    If so, try to restore it - dc351 and reload machine software.
    If fault still exist after all, then you need to replace the ess nvm pwba module.

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    May 2014
    Posts
    93
    Rep Power
    11

    Re: Xerox 550

    Dont remove battery, it will kill the metered pin and reset to default, it also kills the software on the pwb, you will most likely have to purchase a new nvm pwb

  6. #6
    Technician
    Join Date
    Aug 2016
    Location
    London
    Posts
    11
    Rep Power
    6

    Angry Re: Xerox 550

    Quote Originally Posted by mickey singh View Post
    Dont remove battery, it will kill the metered pin and reset to default, it also kills the software on the pwb, you will most likely have to purchase a new nvm pwb
    Wat am I going to do cuz, i hav remove d battery and d time hav reset to 2050 and the error still remains and is not shut down again! Pls help me out!

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    May 2014
    Posts
    93
    Rep Power
    11

    Re: Xerox 550

    Where abouts in london are you? Pm me your details and ill give you a call

  8. #8
    Service Manager 1,000+ Posts
    Xerox 550

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    1,774
    Rep Power
    46

    Re: Xerox 550

    Quote Originally Posted by Jibes_Tech View Post
    Wat am I going to do cuz, i hav remove d battery and d time hav reset to 2050 and the error still remains and is not shut down again! Pls help me out!
    If you have same 117-325 error then you need to replace the ess nvm module.
    The software is still into this module flash memory but the chip device is bad.
    The error 117-325 point to the fact the electronic chip device is malfunctioning.
    If another error is pop-up on the screen this can be a good thing.

  9. #9
    Technician
    Join Date
    Aug 2016
    Location
    London
    Posts
    11
    Rep Power
    6

    Question Re: Xerox 550

    Quote Originally Posted by adriansto View Post
    If you have same 117-325 error then you need to replace the ess nvm module.
    The software is still into this module flash memory but the chip device is bad.
    The error 117-325 point to the fact the electronic chip device is malfunctioning.
    If another error is pop-up on the screen this can be a good thing.
    I hav done dat, is showing error 124-315 pls Wat am I going to do next?

  10. #10
    Service Manager 1,000+ Posts
    Xerox 550

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    1,774
    Rep Power
    46

    Re: Xerox 550

    Quote Originally Posted by Jibes_Tech View Post
    I hav done dat, is showing error 124-315 pls Wat am I going to do next?
    You need to do the gp4 procedure -serial number syncronization- using sys1 as the pwb with good data.
    After that restart machine and check for others errors.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here