WC 5875 AltBoot

[bojans]

Hi,

Having problems with this WC5875, hdd is dead. Trying to AltBoot but seems that I need Data cable or Forced_Upgrade file.
Could anyone share this file with me to do USB Altboot (is it same for 57xx series) and

what kind of cable is 600T02332

Data cable used for PWS AltBoot

Thank you

[Flash]

Did you replace the hard drive? I have had to replace several hard drives on the 58xx series. I have not had any problems with altboot. You just need the dlm. file inside a folder named Altboot on a thumb drive.

[bojans]

Tried with couple hdd's and usb pen's. Not starting, that's why I want to try with PWS Altboot.
Thank you

[adriansto]

SBC board problem.
Take a look at diagnostic led's and read the procedures from edoc.

[bojans]

Thank you Adriansto,

Do you have picture of this Data cable. Or where can I find it online?

[adriansto]

I dont know if you will find it online.
Search by partnumber 600T...


Named also ScreenHunter_98 Jan. 06 14.07.jpgbackchannel cable.

[bojans]

Thank you

[Flash]

Try a new memory module. Software loads to memory first and then to the hard drive.

[Exok]

By the way, you can create your own forced upgrade file. Its an empty file. Create a TXT text file with nothing written in it. Name the file "FORCED_UPGRADE" in all caps just like that. Finally, delete the file extension ".TXT" Place that file inside your Altboot folder along with your DLM file to do a forced altboot.

[bojans]

Thank you Exoc. Tried that but no success.
Does anyone have schematic for this Data cable
I will take almost one month to arrive after order.