Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Field Supervisor 500+ Posts Geo's Avatar
    Join Date
    Nov 2010
    Posts
    661
    Rep Power
    38

    D95/D110 Trouble spots.


    Hi All

    I am working in an in an environment where I am stuck replacing the consumables in these boxes and making the customer happy.. Unfortunately C.S. from Xerox has been less than adequate and the customer is PISSED.. ... So , For future reference I was wondering what the trouble spots are for these boxes and if I can do anything when replacing the CRU. to possibly catch potential problems ?

    Thanks.

  2. #2
    Senior Tech 250+ Posts InterfaceP's Avatar
    Join Date
    Jun 2013
    Location
    Dallas/Fort Worh, TX
    Posts
    487
    Rep Power
    27

    Re: D95/D110 Trouble spots.

    Developer gears tend to stick when releasing to replace the drum unit, also the drum unit sometimes wont engage the switch to detect it's presence.

  3. #3
    Field Supervisor 500+ Posts Geo's Avatar
    Join Date
    Nov 2010
    Posts
    661
    Rep Power
    38

    Re: D95/D110 Trouble spots.

    Quote Originally Posted by InterfaceP View Post
    Developer gears tend to stick when releasing to replace the drum unit, also the drum unit sometimes wont engage the switch to detect it's presence.
    Thanks
    Do you also know what are some of the most common S.C... One has had multiple 012-255 codes and Xerox apparently is having problems fixing this (Five S.C. in 3 weeks). ...
    Also , does Xerox monitor their copiers for needed consumables and service calls .


    Thanks again for the help.

  4. #4
    Senior Tech 250+ Posts InterfaceP's Avatar
    Join Date
    Jun 2013
    Location
    Dallas/Fort Worh, TX
    Posts
    487
    Rep Power
    27

    Re: D95/D110 Trouble spots.

    The inserter (tray 8) on top of the finisher is faulting, not a big deal if your customer isn't using it.

  5. #5
    Field Supervisor 500+ Posts Geo's Avatar
    Join Date
    Nov 2010
    Posts
    661
    Rep Power
    38

    Re: D95/D110 Trouble spots.

    True...Except this copier has only been in service for 3 months...AND this generates a service code on the op panel..

  6. #6
    Senior Tech 250+ Posts InterfaceP's Avatar
    Join Date
    Jun 2013
    Location
    Dallas/Fort Worh, TX
    Posts
    487
    Rep Power
    27

    Re: D95/D110 Trouble spots.

    Lift motor fail: CC [013-002] (Up) or [013-003] (Down)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here