Boot Mode |
Boot Method |
Function |
Long Boot Diagmode |
Turn ON the power while pressing the Power Saver
key and the Start key. |
Automatically determines the condition of each
Sub-System feature/parts, and the causes for communication errors. It keeps the
past 3 Long Boot Diagnostic results in the NVM of ESS and IOT when the specific
diagnostic completes. |
Forced NVM Initialization |
NOTE:
Inform the customer that the Custom Media Profiles
and Auditron/Acounting settings and other special, saved UI options will be
lost. When the process is completed, the message: (Accept all default settings
to bring the printer to Ready condition) appears.
Turn ON the power while pressing the Power Saver
key, Stop key and 2 key. |
Initializes the NVM of the configuration range
(Printer Settings etc.) inside the Controller and starts up. |
Forced LPR Spool Initialization |
Turn ON the power while pressing the Power Saver
key, Stop key and 6 key. |
If an error occurs during LPR spooling and the
system failed to start up after turning the power Off then On, initializes the
domain that stores the print data by LPR spooling and starts up. |
Forced HDD Format |
NOTE:
After performing this procedure, you will need to
re-create the SIQA Folder for the customer. Also, inform the customer that the
Jobs Saved to Folder and the Scan to Folder will be lost.
Turn ON the power while pressing the Power Saver
key, Stop key and 4 key. |
This operation resets the HDD to partitions at
factory settings. Use it as a countermeasure when fault codes 116-331 or 116-354
occur (see 116-354 RAP or 116-331 RAP). |
Software Download mode |
Turn ON the power while pressing the Power Saver
key. |
Power up in Software Download mode when performing
Firmware Upgrade. |
Bookmarks