Xerox 7655 Yellow Lines and Desaturation

[themountainecho]

Hi All,

I'm having a problem with yellow lines and lines of yellow desaturation on one side of my prints. Swapped the M and Y drums to see if that was the issue but nothing changed. The issue happens when doing copies of a blank page as well.

If anyone could point me in the right direction it would be really appreciated.

Thanks in advance,

Ken

17440350_10154662520001339_72771238_n.jpg

[adriansto]

These lines appear only when you make copies or it is visible also when you print from computer ?

[themountainecho]

These lines appear only when you make copies or it is visible also when you print from computer ?

It happens when printing as well. The blank page was a copy, the rest have all been prints.

[themountainecho]

Just a bump in case anyone has any ideas?

Thanks

[Reeves]

check the yellow developer unit they its either there is a portal or developer is low

[Old Xeroid]

check the yellow developer unit they its either there is a portal or developer is low

After removing the yellow drum you can remove two screws and then carefully lift the developer top cover. You will see the blockage if that is causing the defects.

[themountainecho]

check the yellow developer unit they its either there is a portal or developer is low

After removing the yellow drum you can remove two screws and then carefully lift the developer top cover. You will see the blockage if that is causing the defects.

Thanks a million guys! All sorted thanks to you