WC 7435 color misregistration

[simple mind]

Hi Xerox experts,
I do have a big IQ problèm on a WC 7428 machine
When making color prints,the text is blurred,mostly thé magenta is misregistred,sometimes thé yellow is misaligned.
When executing "color registration" in diagnostics (dc975/dc973) it displays NG and codes 89-611/089-613 are registerd in fault history,
I changed MOB sensor,4 led's assy's,drums,MCU,thé wires from MOB to MCU,IBT assembly,reloaded software..
Thé problem still there..
Any suggestions please ????!!
Hère are some d'amples.

[simple mind]

Hère are thé samples.IMG_20170401_131121.jpgIMG_20170310_174157.jpg

[ChiChaK]

just change a registration clutch if u dont know where is it in on that side where is fuser.. below of fuser u will see something similar as motor that is.

[mesha]

just change a registration clutch if u dont know where is it in on that side where is fuser.. below of fuser u will see something similar as motor that is.

Postovani Chichak, i ja imam slican problem na WC 7428, samo izrazeniji

Molim te da pogledas sliku i das mi savjet...

Ovaj "registration clutch" ne mogu da nadjem, da li imas semu gdje se to tacno nalazi.

Bio bi veoma zahvalan na strucnom savjetu.

Pozdrav

[Phil B.]

Postovani Chichak, i ja imam slican problem na WC 7428, samo izrazeniji

Molim te da pogledas sliku i das mi savjet...

Ovaj "registration clutch" ne mogu da nadjem, da li imas semu gdje se to tacno nalazi.

Bio bi veoma zahvalan na strucnom savjetu.

Pozdrav

1) dead thread of 2 years

2) different machine

3) post not in english

4) start a new thread in ENGLISH