Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    Junior Member
    Join Date
    May 2017
    Location
    Rijeka
    Posts
    4
    Rep Power
    0

    Question Bustled Fiery X3ety with Xerox DC250 - Fiery installation disks needed

    Hi everybody,
    few months i bought used Xerox DC250 with Fiery X3ety backmounted controller.
    Everything worked fine, until today. Everything looks normal, but i cant connect trough network.
    In DC250 system settings, network menu is gone.
    I connected keyboard and monitor, tried to reset bios, but in every case, i got linux booting starting linux kernel. Codes on back LCD comes to 00,
    but system seems to freeze.
    I hope that someone will help me with uploading installation files, and prevent me from breaking trough deadlines
    I would like to start first with reinstallation, than if fails again, proceed with testing ram & hdd.

    Thank you in advance

    Best Regards,

    Ildo
    Croatia

  2. #2
    Service Manager 1,000+ Posts
    Bustled Fiery X3ety with Xerox DC250 - Fiery installation disks needed

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    1,796
    Rep Power
    46

    Re: Bustled Fiery X3ety with Xerox DC250 - Fiery installation disks needed

    If your monitor display this on most of the situations the Fiery software is corrupted.
    But also is a good ideea to check the hdd for bad clusters
    Attached Images Attached Images

  3. #3
    Junior Member
    Join Date
    May 2017
    Location
    Rijeka
    Posts
    4
    Rep Power
    0

    Re: Bustled Fiery X3ety with Xerox DC250 - Fiery installation disks needed

    Hey guys, finally i managed to get those disks.
    In the meantime. i checked ram and hdd, and tests showing that everything is fine.
    So, i presume that fiery file system or similar got corrupted.
    Now, i thinking about next steps;
    i found manual for Installing or Updating Fiery System Software that says:
    Fiery System Installer, located on the System Software CDs, offers two methods ofinstalling system software:• Direct Installation—Allows you to reinstall system software directly through acrossover Ethernet cable connected between the Fiery and a Windows computer.This method is for use by authorised service technicians only.• Network Installation—Allows you to update system software on the Fiery through aremote network connection.

    Network installation obviously wont work, because is not visible on network, and direct installation instruction says;
    Follow steps 1 through 5 of the procedure “To install system software over the networkport” in the Installation and Service Guide.

    Does anybody have some tips about this part of my problem?

  4. #4
    Technician
    Join Date
    May 2017
    Location
    TANZANIA
    Posts
    23
    Rep Power
    5

    Re: Bustled Fiery X3ety with Xerox DC250 - Fiery installation disks needed

    Quote Originally Posted by chilldo View Post
    Hey guys, finally i managed to get those disks.
    In the meantime. i checked ram and hdd, and tests showing that everything is fine.
    So, i presume that fiery file system or similar got corrupted.
    Now, i thinking about next steps;
    i found manual for Installing or Updating Fiery System Software that says:
    Fiery System Installer, located on the System Software CDs, offers two methods ofinstalling system software:• Direct Installation—Allows you to reinstall system software directly through acrossover Ethernet cable connected between the Fiery and a Windows computer.This method is for use by authorised service technicians only.• Network Installation—Allows you to update system software on the Fiery through aremote network connection.

    Network installation obviously wont work, because is not visible on network, and direct installation instruction says;
    Follow steps 1 through 5 of the procedure “To install system software over the networkport” in the Installation and Service Guide.

    Does anybody have some tips about this part of my problem?
    Hi. have you solved your problem? coz I had same problem but I managed to install the software with the steps explained on the CD

  5. #5
    Senior Tech 250+ Posts InterfaceP's Avatar
    Join Date
    Jun 2013
    Location
    TX
    Posts
    449
    Rep Power
    18

    Re: Bustled Fiery X3ety with Xerox DC250 - Fiery installation disks needed

    You need the USB Prep tool. PM me if you need it.

  6. #6
    Junior Member
    Join Date
    Jun 2017
    Posts
    5
    Rep Power
    0

    Re: Bustled Fiery X3ety with Xerox DC250 - Fiery installation disks needed

    i guys, i have the same issues with an xerox docucolor 242 with fiery controlloer.

    i need disk to reinstall it, can you help me?

    tnx bye

  7. #7
    Service Manager 1,000+ Posts
    Bustled Fiery X3ety with Xerox DC250 - Fiery installation disks needed

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    1,796
    Rep Power
    46

    Re: Bustled Fiery X3ety with Xerox DC250 - Fiery installation disks needed

    Check Fiery hdd first.
    dc242 Fiery is more robust than dc250

  8. #8
    Junior Member
    Join Date
    Jun 2017
    Posts
    5
    Rep Power
    0

    Re: Bustled Fiery X3ety with Xerox DC250 - Fiery installation disks needed

    but if the hdd is breacked or the system have issues i need to reinstall the system

    now i maked a test of hdd, after finish tell you

  9. #9
    Junior Member
    Join Date
    May 2017
    Location
    Rijeka
    Posts
    4
    Rep Power
    0

    Re: Bustled Fiery X3ety with Xerox DC250 - Fiery installation disks needed

    Quote Originally Posted by dataservice View Post
    i guys, i have the same issues with an xerox docucolor 242 with fiery controlloer.

    i need disk to reinstall it, can you help me?

    tnx bye
    What issues you got?
    On end i had MB failure, network chipset was burned down.

    Ordered used one from ebay for around 100$, now waiting

    If U need disks or some tools PM me, i can upload ISO's on my drive.

    Just let me know results from HDD test

  10. #10
    Junior Member
    Join Date
    Jun 2017
    Posts
    5
    Rep Power
    0

    Re: Bustled Fiery X3ety with Xerox DC250 - Fiery installation disks needed

    Quote Originally Posted by dataservice View Post
    but if the hdd is breacked or the system have issues i need to reinstall the system

    now i maked a test of hdd, after finish tell you

    hdd test finish, hdd is good!


    and now???? can you help me please????

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here