xerox wc 5755

[prismtech]

You will need to throw all of that generic/reused toner away, get genuine toner, replace the developer unit and calibrate.

This is the fix!

Asian knock off toner is a mix of shredded car tires and black shoe polish.

Sent from my SM-J120W using Tapatalk

[walidcharifi]

You will need to throw all of that generic/reused toner away, get genuine toner, replace the developer unit and calibrate.

thanks .
how to calibrate ????

[Jake2o]

Just repalce the developer module and developer material.
Follow service manual procedure for replacement and it will do all the calibration you need:-

1. Select dC131 location 09-271 developer age and reset to zero.
   
2. Perform the dC905 TC Sensor Calibration.
   
3. Perform ADJ 9.2 Image Quality Adjustment Routine.
   
4. If a new developer assembly is installed, reset the Developer count to zero in the HFSI feature screen. Refer to GP 17 High Frequency service Items.
   
   

[InterfaceP]

This is the fix!

Asian knock off toner is a mix of shredded car tires and black shoe polish.

Sent from my SM-J120W using Tapatalk

LMAO! Nice one!

[ChiChaK]

If you have stains such as splashed (as I can see on ur PDF) this is DRUM!
- open the drum and from the top side u can see the rubber which abuts drum .... is on some place seperated from drum...
change drum and I am sure 100%

[ChiChaK]

Just repalce the developer module and developer material.
Follow service manual procedure for replacement and it will do all the calibration you need:-

1. Select dC131 location 09-271 developer age and reset to zero.
2. Perform the dC905 TC Sensor Calibration.
3. Perform ADJ 9.2 Image Quality Adjustment Routine.
4. If a new developer assembly is installed, reset the Developer count to zero in the HFSI feature screen. Refer to GP 17 High Frequency service Items.

wait... take a look logic..

if is a problem with that developer station ist to be lighter copy? as I said, this is just to drum!