Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 0
xerox 7132
Xerox 7232 displayed 010-333 need help
-
Technician
- Rep Power
- 14
Re: xerox 7132 10-333
Hi
clear the value of NVM [744-248] to "0",
Initial Actions
•Turn the power OFF and remove the Fuser Assembly. clean termistors or see if paper is wound around the Heat Roll.
•Check whether the MCU PWB connector P/J408 is connected properly.
Check LVPS
Turn the power OFF, disconnect the Main LVPS connector P/J1 and P/J2.
At the PWB, measure the resistance between P/J1-3 and P/J2-3/4.
the resistance not infinite replace LVPS.
the resistance infinite :Check fuser component or Replace the Fuser Assembly.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks