Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: xerox 7132

  1. #1
    Senior Tech 100+ Posts
    Join Date
    Feb 2010
    Location
    Bamenda
    Posts
    230
    Rep Power
    0

    xerox 7132

    Xerox 7232 displayed 010-333 need help

  2. #2
    Technician
    Join Date
    Jun 2017
    Location
    tehran
    Posts
    26
    Rep Power
    14

    Re: xerox 7132 10-333

    Hi
    clear the value of NVM [744-248] to "0",
    Initial Actions
    •Turn the power OFF and remove the Fuser Assembly. clean termistors or see if paper is wound around the Heat Roll.
    •Check whether the MCU PWB connector P/J408 is connected properly.
    Check LVPS
    Turn the power OFF, disconnect the Main LVPS connector P/J1 and P/J2.
    At the PWB, measure the resistance between P/J1-3 and P/J2-3/4.
    the resistance not infinite replace LVPS.

    the resistance infinite :Check fuser component or Replace the Fuser Assembly.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here