xerox workcentre 7232

[cliffhangers]

xerox workcentre 7232 has a low voltage error which i one to clair bet it's asking me password i have try 11111 it say wrong password i need help to cross pass the password.if any person have solf this please help me.THANKS IN ADVANCE.

[Mukasa]

xerox workcentre 7232 has a low voltage error which i one to clair bet it's asking me password i have try 11111 it say wrong password i need help to cross pass the password.if any person have solf this please help me.THANKS IN ADVANCE.

Resetting the Administrator Password

Purpose

The purpose of this procedure is to allow the CSE to recover the Administrator Password in situations where the customer has changed the password from the default value, and subsequently lost or forgotten the password.


Procedure

1. Enter UI Diagnostic Mode.
   
2. Press the Log In/Out button on the Control Panel
   
3. Select System Settings.
   
4. Select Common Settings.
   
5. Select Diagnostics / Maintance.
   
6. Select NVM Read/Write.
   
7. Enter location 700-171 and press Confirm/Change. This is the current password. You can provide this number to the customer, or set the location to the default value five one’s (11111) and allow the customer to enter a new number from Tools mode.