Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Service Manager 1,000+ Posts
    Phaser 7100N with error 010-338  "fuser unit fail"


    Join Date
    Aug 2007
    Location
    Brooklyn
    Posts
    1,130
    Rep Power
    32

    Thumbs up Phaser 7100N with error 010-338 "fuser unit fail"

    Customer called with error 010-338 on Phaser 7100n. Customer said he just changed fuser unit to get rid of error but still has 010-338.Any help is appreciated. Is there a reset procedure on this machine that is necessary
    after fuser unit is changed. I asked cust. if sure it was a new unit and he said yes. Any advice is appreciated. I will check SM in meantime to see if I see anything though I thought I saw this was a fuser unit fail error but
    did not see a service mode reset procedure for this. Frank/ActionPhotocopy


  2. #2
    Service Manager 1,000+ Posts
    Phaser 7100N with error 010-338  "fuser unit fail"

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    1,585
    Rep Power
    40

    Re: Phaser 7100N with error 010-338 "fuser unit fail"

    Nothing to do with the fuser.
    Check for toner low or empty


  3. #3
    Service Manager 1,000+ Posts
    Phaser 7100N with error 010-338  "fuser unit fail"


    Join Date
    Aug 2007
    Location
    Brooklyn
    Posts
    1,130
    Rep Power
    32

    Thumbs up Re: Phaser 7100N with error 010-338 "fuser unit fail"

    Hi Adi . Thank you for your info. It is a little confusing because the Phaser 7100 service manual on page 2-83 states that error 010-338 is a Fuser Unit On Time Fail Error.

    Originally the customer called and said he had been using the machine although there was a lot of toner spillage but machine was working. Then change toner cartridge(BLack) message.
    After customer changed cartridge he got the 010-338 error. I told him to make sure it was OEM before calling for service. he bought OEM and still had error. I saw info in service manual and told customer
    he would probably need fuser unit. He ordered it himself from amazon.com and called this morning to say he still had error. As I am writing this customer just called to say he is out of office but thinks error
    has disappeared as machine is asking for loading of paper. He will call tomorrow. Frank


  4. #4
    Service Manager 1,000+ Posts
    Phaser 7100N with error 010-338  "fuser unit fail"

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    1,585
    Rep Power
    40

    Re: Phaser 7100N with error 010-338 "fuser unit fail"

    It is machine software glitch.
    Was ( or is ) technical bulletin about this on Eureka.


  5. #5
    Service Manager 1,000+ Posts
    Phaser 7100N with error 010-338  "fuser unit fail"


    Join Date
    Aug 2007
    Location
    Brooklyn
    Posts
    1,130
    Rep Power
    32

    Thumbs up Re: Phaser 7100N with error 010-338 "fuser unit fail"

    Customer supposedly changed black toner for oem. Anyway he will call me tomorrow to let me know if working now


  6. #6
    Service Manager 1,000+ Posts
    Phaser 7100N with error 010-338  "fuser unit fail"


    Join Date
    Aug 2007
    Location
    Brooklyn
    Posts
    1,130
    Rep Power
    32

    Thumbs up Re: Phaser 7100N with error 010-338 "fuser unit fail"

    customer says machine is now working


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here