Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Technician
    Join Date
    Jun 2009
    Posts
    24
    Rep Power
    18

    Xerox 4595 Error code 010-315---HELP

    Hey everyone, hopefully someone can shed some further insight as to what to check. Xerox support site only tells me to check the fuser draw, duplexer tray and cycle power.. DOne all that simple stuff and nothing changed. Rebuilt the fuser section with a new fuser roller and heat roller..Still no change. Checked to make sure the main contact for the fuser drawer was clean and seated properly...What else should I be looking at??? This happened during an active run..Just stopped with this error and obviously wont go again..Thx


  2. #2
    Service Manager 1,000+ Posts Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    1,104
    Rep Power
    17

    Re: Xerox 4595 Error code 010-315---HELP


  3. #3
    Technician
    Join Date
    Jun 2009
    Posts
    24
    Rep Power
    18

    Re: Xerox 4595 Error code 010-315---HELP

    Thx for the reply.. Yes this is where I started.. Did all this and no change.. I can go back over it all a third time and maybe look closer but I doubt the result will change


  4. #4
    Service Manager 1,000+ Posts Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    1,104
    Rep Power
    17

    Re: Xerox 4595 Error code 010-315---HELP

    Quote Originally Posted by printprocc View Post
    Thx for the reply.. Yes this is where I started.. Did all this and no change.. I can go back over it all a third time and maybe look closer but I doubt the result will change
    so the door magnets are straight and tight?


  5. #5
    Technician
    Join Date
    Jun 2009
    Posts
    24
    Rep Power
    18

    Re: Xerox 4595 Error code 010-315---HELP

    Yes they all appear to be.. Everything seats nicely and the magnets are firmly planted in what looks like the proper position.. I will try to post pics from my phone..brb


  6. #6
    Technician
    Join Date
    Jun 2009
    Posts
    24
    Rep Power
    18

    Re: Xerox 4595 Error code 010-315---HELP

    Hmmm having difficulty uploading pics


  7. #7
    Technician
    Join Date
    Jun 2009
    Posts
    24
    Rep Power
    18

    Re: Xerox 4595 Error code 010-315---HELP

    20171003_151923.jpg20171003_151951.jpg20171003_152030.jpgFinally.
    Sorry for the delay, it's been busy. SO From what I see all the magnets and associated latchets appear to be straight and contact properly.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here