Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    hyd_geminie
    Guest

    DC 230 St warming Problem

    Hi,
    I have dc 230 st copier.when i switch on the copier it showing the message " Please Wait - system is warming up" and is remaining for hours. I'm unable to find out the problem.please post the solution for this issue. Is this problem raises due to bad sectors in hard Disk?. if so how to remove them.

    If possible please send the service manual to hyd_geminie@yahoo.com

    geminie.

  2. #2
    Senior Tech 100+ Posts suckis's Avatar
    Join Date
    Dec 2006
    Location
    Thessaloniki
    Posts
    166
    Rep Power
    0
    There is a battery on the MCU board. Turn the copier off and shortcut the (+) of this battery with the ground (chassis) for 60 seconds. Turn on the copier. It should be "ready to copy".
    ! RTFM !
    My site: http://www.e-club.gr/

  3. #3
    hyd_geminie
    Guest
    Quote Originally Posted by suckis View Post
    There is a battery on the MCU board. Turn the copier off and shortcut the (+) of this battery with the ground (chassis) for 60 seconds. Turn on the copier. It should be "ready to copy".
    Hi suckis.I am Geminie (Xerox DC 230 st). U helped me a lot by posting the answer and it worked fine.Ive done exactly as u said and the result is awesome.Thank u verrrrrrrrry much suckis.U ROCK.Keep helping others.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here