Results 1 to 9 of 9
  1. #1
    Technician
    Join Date
    May 2016
    Location
    spartanburg,sc
    Posts
    12
    Rep Power
    16

    Start working on Xerox in a week...

    Any recommendations for a Sharp tech with 13 years experience to start working on Xerox? I've never even made a copy on one.

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Jan 2015
    Location
    arlington, tn
    Posts
    92
    Rep Power
    19

    Re: Start working on Xerox in a week...

    If it was me I'd run. Xerox has some bad mojo.

    Sent from my LGL41C using Tapatalk

  3. #3
    Senior Tech 250+ Posts
    Start working on Xerox in a week...


    Join Date
    Feb 2011
    Location
    West Palm Beach, Fl.
    Posts
    256
    Rep Power
    32

    Re: Start working on Xerox in a week...

    It really depends what machines you will be working on?

    If you are just working on the small to lower end stuff, your Sharp experience will get you thru most repairs.

    If you are going to be working on mid-size to upper end machines, I hope you are going to work for a Xerox dealer. (or at least have a Xerox trained tech working with you)

    As you will need to contact escalated tech support sooner or later, and they only talk to techs that.

    A: Are certified trained on that product.
    B: Work for a authorized dealer ASP.

    This forum is probably one of your best bets if you don't have either of the above.
    (Also you will have to get used to Xerox edoc's manual system)

    Good luck

  4. #4
    Service Manager 5,000+ Posts
    Start working on Xerox in a week...

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Start working on Xerox in a week...

    Quote Originally Posted by kev577 View Post
    Any recommendations for a Sharp tech with 13 years experience to start working on Xerox? I've never even made a copy on one.
    I share your pain.................
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  5. #5
    Technician
    Join Date
    May 2016
    Location
    spartanburg,sc
    Posts
    12
    Rep Power
    16

    Re: Start working on Xerox in a week...

    Quote Originally Posted by rockdude View Post
    It really depends what machines you will be working on?

    If you are just working on the small to lower end stuff, your Sharp experience will get you thru most repairs.

    If you are going to be working on mid-size to upper end machines, I hope you are going to work for a Xerox dealer. (or at least have a Xerox trained tech working with you)

    As you will need to contact escalated tech support sooner or later, and they only talk to techs that.

    A: Are certified trained on that product.
    B: Work for a authorized dealer ASP.

    This forum is probably one of your best bets if you don't have either of the above.
    (Also you will have to get used to Xerox edoc's manual system)

    Good luck



    Luckily we believe in training, Xerox coming for 7 weeks to train us, then I'm the TTT trainer. We will be working on everything from desk tops to "graphic color". I hope the hotline is better than Sharp's.

  6. #6
    Service Manager 10,000+ Posts
    Start working on Xerox in a week...

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,656
    Rep Power
    658

    Re: Start working on Xerox in a week...

    don't walk away



    RUN AS FAST AS YOU CAN!

  7. #7
    Senior Tech 250+ Posts
    Join Date
    Feb 2009
    Location
    Rogers, Arkansas
    Posts
    466
    Rep Power
    35

    Re: Start working on Xerox in a week...

    What's the biggest model you'll be allowed to service?

  8. #8
    Senior Tech 100+ Posts
    Start working on Xerox in a week...


    Join Date
    May 2014
    Posts
    198
    Rep Power
    22

    Re: Start working on Xerox in a week...

    All the new Xerox machines are cheap Chine garbage.

    Get used to pulling out little broken nylon gears.

  9. #9
    Service Manager 10,000+ Posts
    Start working on Xerox in a week...

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,656
    Rep Power
    658

    Re: Start working on Xerox in a week...

    xerox has been using Samsung engines in their boxes for a few years... no wonder they are sooo crappy.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here