Thanks Thanks:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Senior Tech 250+ Posts Jake2o's Avatar
    Join Date
    Dec 2007
    Location
    Lancashire
    Posts
    304
    Rep Power
    25

    Angry Xerox 4110 Transfer belt keeps tearing

    We are currently looking after a Xerox 4110 B&W machine that continually rips the transfer belt after 100 or so copies on A3 or SRA3. I can run thousands of A4 through without a hitch but always on A3 it runs the belt over to one side a rips it.
    This will be the 4th belt we have now put on.
    We have used 3 different transfer sections complete. I am at my wits end now.
    Any help or advice appreciated guys.


  2. #2
    Service Manager 2,500+ Posts
    Xerox 4110 Transfer belt keeps tearing

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    2,773
    Rep Power
    0

    Re: Xerox 4110 Transfer belt keeps tearing

    Quote Originally Posted by Jake2o View Post
    We are currently looking after a Xerox 4110 B&W machine that continually rips the transfer belt after 100 or so copies on A3 or SRA3. I can run thousands of A4 through without a hitch but always on A3 it runs the belt over to one side a rips it.
    This will be the 4th belt we have now put on.
    We have used 3 different transfer sections complete. I am at my wits end now.
    Any help or advice appreciated guys.
    part of being a tech is figuring out what is CAUSING the problem... just throwing parts at it doesn't fix the issue just pisses off the customer. look for the cause.


  3. #3
    Senior Tech 250+ Posts Jake2o's Avatar
    Join Date
    Dec 2007
    Location
    Lancashire
    Posts
    304
    Rep Power
    25

    Re: Xerox 4110 Transfer belt keeps tearing

    Quote Originally Posted by Phil B. View Post
    part of being a tech is figuring out what is CAUSING the problem... just throwing parts at it doesn't fix the issue just pisses off the customer. look for the cause.
    We have been trying to figure out the cause for the last 3 months both in the workshop and onsite. Most of the belts have been used in the workshop but we cannot see anything that would cause this. That is why I am now asking for help and if anybody else has come across this before. We have gone through the diagnostic process of changing out various sections to rule out possible causes.
    The service manual and eureka don't seem to have any further information about this


  4. #4
    Service Manager 1,000+ Posts
    Join Date
    Aug 2006
    Posts
    1,012
    Rep Power
    36

    Re: Xerox 4110 Transfer belt keeps tearing

    What software level is on 4110?


  5. #5
    Senior Tech 100+ Posts
    Xerox 4110 Transfer belt keeps tearing

    cscce's Avatar
    Join Date
    Jun 2014
    Location
    San Antonio
    Posts
    138
    Rep Power
    11

    Re: Xerox 4110 Transfer belt keeps tearing

    Do you have a photo of a ripped transfer belt?


  6. #6
    Senior Tech 250+ Posts Jake2o's Avatar
    Join Date
    Dec 2007
    Location
    Lancashire
    Posts
    304
    Rep Power
    25

    Re: Xerox 4110 Transfer belt keeps tearing

    Quote Originally Posted by cscce View Post
    Do you have a photo of a ripped transfer belt?
    One of the ripped belts is here - this is one of the more extreme but they all do the same thing.

    4110.pdf


  7. #7
    Service Manager 1,000+ Posts
    Join Date
    Aug 2006
    Posts
    1,012
    Rep Power
    36

    Re: Xerox 4110 Transfer belt keeps tearing

    Fuser secure pin. Is it on its place.


  8. #8
    Senior Tech 250+ Posts Jake2o's Avatar
    Join Date
    Dec 2007
    Location
    Lancashire
    Posts
    304
    Rep Power
    25

    Re: Xerox 4110 Transfer belt keeps tearing

    Quote Originally Posted by xcopytech View Post
    Fuser secure pin. Is it on its place.
    Yes, and the fuser nip is spot on. It is tracking outboard and tearing on the little earth strap on the lead belt roll, but only when you put A3 in. i have 2 of these machines doing the same thing. Initially they were both in the same client, but now have moved to 2 separate sites. I am starting to wonder if somebody has been messing with the factory adjustment on that bearing at the front. I have an FSB for that, but it is for tracking in general rather than just on A3.


  9. #9
    Service Manager 1,000+ Posts
    Xerox 4110 Transfer belt keeps tearing

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    1,715
    Rep Power
    44

    Re: Xerox 4110 Transfer belt keeps tearing

    Eureka 585649 must be read


  10. #10
    Field Supervisor 500+ Posts knightfall's Avatar
    Join Date
    Jul 2006
    Location
    State of Unconsciousness
    Posts
    615
    Rep Power
    31

    Re: Xerox 4110 Transfer belt keeps tearing

    Quote Originally Posted by adriansto View Post
    Eureka 585649 must be read
    has anyone replace the itb assembly?

    Get your facts first, and then you can distort them as much as you please.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here