Xerox Work Center 3655

[kmtech]

I picked this 3655< once the main switch is turned on it just keeps cycling on and then off. has anyone had this problem?
Thanks in advance
Bill

[Flash]

Try reloading firmware or replacing the hard drive.

[kmtech]

Try reloading firmware or replacing the hard drive.

Thanks for the suggestions, I will try them and let you all know what it was
Bill

[kmtech]

Thanks for the suggestions, I will try them and let you all know what it was
Bill

I tried to log in but the way its cycling i cant. power on the interrupt button blinks and it turns off and back on again.
any suggestions..

[Samwise]

You most likely will have to try doing the altboot procedure, if that doesn't work, then the hdd is unrecoverable, see GP9 in the edoc.

[rockdude]

You can disconnect the hard drive and see if it boots up normally then.