C45 7655 and 5655 saying provide payment or enter code

**jmandassociates** · 09-10-2008

We have a C45, 7655, and a 5655 that were all removed from a place that had them connected to the automated credit card payment machines. Now that we have them at our place disconnected from their setup how do we disable this setting to change them back to a normal use copier.
The 7655 says "provide Payment or enter code"
The C45 and the 5655 say "Foreign interface device, to use machine services do one of the following access control device insert card, enter access code, insert money, insert key counter or appropriate action for your device.

**Veedle** · 09-10-2008

Hi,
For the 7655 ( off the top of my head ), to disable the foreign interface you have to enter the UI Tools, select Accounting, Accounting enablement, and then Accounting mode. Or something along those lines...
You may also need to remove the FDI board from the CCM board.
You should then be able to use it normally.

Don't know about the other machines.

**jmandassociates** · 09-11-2008

I removed the FDI board, but when I try to make a copy it still says provide payment or enter code. I went into the Tools menu and the only thing in there is the group calibration. There are no other settings on there visible.