![Thanks](https://www.copytechnet.com/forums/dbtech/thanks/images/thanks.png)
Thanks:
0
![Likes](https://www.copytechnet.com/forums/dbtech/thanks/images/likes.png)
Likes:
0
![Dislikes](https://www.copytechnet.com/forums/dbtech/thanks/images/dislikes.png)
Dislikes:
0
-
Junior Member
- Rep Power
- 0
091-320
hI,
I have xerox 4112 (North America) which show 091-320. i replaced new drum . It was ok initially but error came out again. I even replace another drum unit from another machine & same thing happens. Any one can advice?
-
Junior Member
- Rep Power
- 0
Re: 091-320
The rear side of the developer unit has a small metal plate that makes contact with a spring on the machine side. Remove the developer unit and clean that contact plate and the spring on the machine side (be careful - the spring contact can become dislodged).
-
Technician
- Rep Power
- 0
Re: 091-320
Had this error code, tried the connectors and leads, tried a hvps. Turned out to be the A.C PWB...
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks