Cause: 45-312
Damaged high voltage lead on 2nd BTR assembly causing arcing and electrical noise.
Solution: |
[IMG]pws://file/xrxdata/xpws/templates/thumbsup.gif[/IMG] Fixed! [IMG]pws://file/xrxdata/xpws/templates/thumbsdn.gif[/IMG] Did not fix. |
Inspect the 2nd BTR high voltage lead on each end for damage.
Ensure that the connectors are securely attached to the wire on each end. In most cases the connector is only attached by a couple of strands of wire, the rest of the strands look like they were cut when the connector was crimped onto the wire.
Repair 2nd BTR high voltage lead or replace the 2nd BTR assembly (
PL 4.1 item 3).
45-360
check the fiery software
Bookmarks