Color test

[zoraldinho]

Hi!

I would be very grateful for the simple instructions.Not familiar with Xerox.
I need to evaluate the machine and I would like to print a color test pattern to check the quality of the printing. I do not have the ability to print from pc. I need some kind of color report from memory.


Thanks!

[xcopytech]

Maybe we can help you if you tell us for which machine you need test print. (Dc250/252, dcp700, c550, etc)

[blackcat4866]

Does it print from USB? How about this:

[zoraldinho]

Does it print from USB? How about this:

Thanks David!


I have in mind test print from service mode like Canon PG-5,PG-10.....
It's WorkCentre 24.

[zoraldinho]

Maybe we can help you if you tell us for which machine you need test print. (Dc250/252, dcp700, c550, etc)

Sorry.My bad. It's WorkCentre 24.
I mentioned the model in the previous thread but subconsciously I wrote the last word print.
Yesterday, I spent 30 minutes setting up default scan settings but always PDF file jump back to JPG.Entering admin mode with a few ones and set in "scan defaut" but no go.
Any hints?


Thanks!

[xcopytech]

For wc24 you will need xerox pws and wc24 diagnostig tool to make test prints.

[adriansto]

Sorry.My bad. It's WorkCentre 24.
I mentioned the model in the previous thread but subconsciously I wrote the last word print.
Yesterday, I spent 30 minutes setting up default scan settings but always PDF file jump back to JPG.Entering admin mode with a few ones and set in "scan defaut" but no go.
Any hints?


Thanks!

Also there are several machine software versions.
May be some version dont accept pdf scanning.
I think I have pws tool for m24 machine but I'm not sure about this.

[zoraldinho]

Also there are several machine software versions.
May be some version dont accept pdf scanning.
I think I have pws tool for m24 machine but I'm not sure about this.

Thanks Adrian!


I doubt about the software, because for each document, the pdf is working ok.It won't stay dafault.