WC 5845 ... white screen Help Plzzz

[papoudaii]

Hi gys . someone hlp me plz
ih hev the XEROX WC 5845 ferstly she stuck on the start screen
like that
28555571_1697666916959792_1402112945_o.jpg28547425_1697666880293129_1482319890_o.jpg
i tryd restart ti ...no result
end i formatd the SD card ((by mistake))
28548205_1697666786959805_2045244331_o.jpg28554684_1697666836959800_1053195719_o(1).jpg
now when I turn on the machine . she stuck "white screen"
end i trayd to boot it .. no result
28584527_1697666793626471_1403569872_o.jpg28503996_1697666800293137_2090516160_o.jpg
someone send me en "ISO" for the SDcard or any other solution

[adriansto]

Put back the sd card and watch the error that appear on sbc pwb display - back side of the scanner

[papoudaii]

28504274_1697932460266571_689774591_o.jpg28547663_1697932410266576_741890143_o.jpg

[adriansto]

28504274_1697932460266571_689774591_o.jpg28547663_1697932410266576_741890143_o.jpg

8 error code indicate you have defective memory module on SBC pwb.
But also your sd card is corrupted so purchase a new sd card try to reload software using usb memory stick and if the 8 error is still there then replace the memory module.

[markuss100]

you could re-install a firmware by using a pin drive insert it from the back and find the firmware on Business Services and Digital Printing Solutions – Xerox
-you need a pin drive on that pen drive creat a folder name it altboot
-place the firmware you dawnloaded on the altboot folder
-then create a text document empty just name it FORCE_UPGRADE use caps word
-turn off your machine then insert your pen drive then turn it on
-at that point it should appear software upgrade in a moments
if the screen still white you should order a new sd card

[papoudaii]

i mounted a new SD card and new HDD and new memory module
i usid a pin drive insert it from the back "altboot folder & FORCED_UGRADE"

she still a screen white & the 8 error

[adriansto]

i mounted a new SD card and new HDD and new memory module
i usid a pin drive insert it from the back "altboot folder & FORCED_UGRADE"

she still a screen white & the 8 error

The new SD card is from Xerox ?

[papoudaii]

its a standard SD
28468463_1695832983788206_5115659731502891008_n.jpg

[adriansto]

Nice.
You can use it into old photocamera.
On that sd card must be some instructions.
Purchase it from Xerox

[papoudaii]

any other solution !!???