xerox dc242 problem with transparency

[Enzo]

Hello friends. I have a printing problem with xerox dc242. see the attached file. I have a problem with transparency. transparency is almost invisible on the file, while in print it is very clear. the same file, on other machines also xerox I do not have this problem. How can I solve it? I did the calibration but I did not solve it

file print.jpg

[xcopytech]

In max setup you can adjust colors.

[adriansto]

Hello friends. I have a printing problem with xerox dc242. see the attached file. I have a problem with transparency. transparency is almost invisible on the file, while in print it is very clear. the same file, on other machines also xerox I do not have this problem. How can I solve it? I did the calibration but I did not solve it

file print.jpg

Transfer problem.
You need to play with 2nd btr curent transfer.

[Enzo]

I tried to do the max setup and to change the 2nd btr. the problem is still there. the quality of the color has improved but that problem is still there. can I change some specific settings? maybe using a patch to correct the watermark?

[xcopytech]

What did you adjust in max setup?

[Enzo]

"atc sensor" and "auto gradation". other commands I do not know in the details

[xcopytech]

Atc sensor need to be adjusted only if you replace developer housing.
Perform max setup adjustment from service manual and you will be able to get proper print quality.
Adj 9.1 to 9.5

[Iowatech]

Hello friends. I have a printing problem with xerox dc242. see the attached file. I have a problem with transparency. transparency is almost invisible on the file, while in print it is very clear. the same file, on other machines also xerox I do not have this problem. How can I solve it? I did the calibration but I did not solve it

file print.jpg

This might be the stupidest thing ever, but what type of transparency are you using? Some transparencies are not fit to be used in this application, and they will cause issues like this.
Sorry if this was a waste of time.

[Enzo]

Atc sensor need to be adjusted only if you replace developer housing.
Perform max setup adjustment from service manual and you will be able to get proper print quality.
Adj 9.1 to 9.5

Which setting should I check?

[Enzo]

This might be the stupidest thing ever, but what type of transparency are you using? Some transparencies are not fit to be used in this application, and they will cause issues like this.
Sorry if this was a waste of time.

Maybe I wrote the title badly. I have problems with images like watermark. When I set some images like the one in the picture in my first post, they are much more visible in print. On other machines, the same file is printed correctly.