Xerox Versant Jam After NVM INT

[MRJESSE]

Have a Versant 80 the had its NVM SYS, USR & IOT INT. Since them, documents over 1 page jams just before getting to the 2nd BTR.

No physical reason for the jam, looks like an error with the sensors.

Any suggestions?

[InterfaceP]

Did you save the NVM before you did the restore?

[aneudimadera]

I saw that issue on Xerox color 560 after NVM init, it's just an NVM for the use of transparencies that need to be changed.

Have a Versant 80 the had its NVM SYS, USR & IOT INT. Since them, documents over 1 page jams just before getting to the 2nd BTR.

No physical reason for the jam, looks like an error with the sensors.

Any suggestions?

Enviado desde mi Nexus 6 mediante Tapatalk

[Dech]

I saw that issue on Xerox color 560 after NVM init, it's just an NVM for the use of transparencies that need to be changed.

Enviado desde mi Nexus 6 mediante Tapatalk

742-367

Paper Type Detection Limit (Transparency Operation Limit)

Sets the Paper Type Detection Limit (Transparency Operation Limit). 0: Can operate, 1: Cannot operate This parameter is fixed to [1: Cannot operate] as the Trasparency Sensor related component has been removed.

Set it to 1