Results 1 to 8 of 8
  1. #1
    Senior Tech 100+ Posts JLSam's Avatar
    Join Date
    Jun 2015
    Location
    Los Angeles
    Posts
    220
    Rep Power
    13

    WC 5865i Firmware upgrade

    Long story short, Xerox Helpline advised me that this machine needs a software update to resolve a particular issue.

    Sure! I've done it plenty times before on previous models.

    So I download the firmware via support.xerox.com, download the manual upgrade, download the Manual upgrade. I copy and paste the 07319007534540 dlm file to USB(fat32) > altboot > FORCED_UPGRADE (no extension).

    I come back... who knows how long I didn't count. But it started saying "Device unavailable". And would reboot, again, and again in 10 minute intervals?

    Called Xerox, Rep says "Oh yeah, sometimes that firmware fails I don't use that one. Use this one, sends me a link to this file:
    Workcentre_5845-5890_system-sw07319004815000

    I repeat the process, and....It's been like this for over an hour. Haven't seen the upgrade form yet.

    Help would be appreciated.



  2. #2
    Senior Tech 100+ Posts jhalfhide's Avatar
    Join Date
    Apr 2015
    Posts
    227
    Rep Power
    10

    Re: WC 5865i Firmware upgrade

    Getting any activity on the USB key (lights)? Iíve had one USB key refuse to work before so used another. Was the machine working before as this can sometimes be a sign of a HDD thatís failed?


    Sent from my iPhone using Tapatalk


  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Oct 2014
    Posts
    92
    Rep Power
    0

    Re: WC 5865i Firmware upgrade

    Try another USB
    If not
    Try to format HDD and altboot with 71.xxx.xxx
    Firmware if all ok upgrade to 72.xx
    Then to 73.xx


  4. #4
    Service Manager 1,000+ Posts
    Join Date
    Aug 2006
    Posts
    1,010
    Rep Power
    36

    Re: WC 5865i Firmware upgrade

    I think that you tried to install wrong firmware.
    You should download install firmware for wc5865i not for wc5865.

    WorkCentre 5865i/5875i/5890i Drivers & Downloads


  5. #5
    Senior Tech 100+ Posts jhalfhide's Avatar
    Join Date
    Apr 2015
    Posts
    227
    Rep Power
    10

    Re: WC 5865i Firmware upgrade

    Quote Originally Posted by xcopytech View Post
    I think that you tried to install wrong firmware.
    You should download install firmware for wc5865i not for wc5865.

    WorkCentre 5865i/5875i/5890i Drivers & Downloads
    Same firmware. No difference and the only difference between the i and non i is that the i came shipped with the newer software.


    Sent from my iPhone using Tapatalk


  6. #6
    Senior Tech 100+ Posts JLSam's Avatar
    Join Date
    Jun 2015
    Location
    Los Angeles
    Posts
    220
    Rep Power
    13

    Re: WC 5865i Firmware upgrade

    Quote Originally Posted by jhalfhide View Post
    Getting any activity on the USB key (lights)? Iíve had one USB key refuse to work before so used another. Was the machine working before as this can sometimes be a sign of a HDD thatís failed?
    Quote Originally Posted by jhalfhide View Post
    Same firmware. No difference and the only difference between the i and non i is that the i came shipped with the newer software.
    My USB does have an activity light. You can see it there on the picture. The machine was able to copy, but it did not print, for any computer, or any internal configuration reports. Thanks for the comment on the firmware, I was asking myself why Xerox Helpdesk would ask me to use a different firmware. So your comment puts my mind at ease.

    Quote Originally Posted by mkdirs View Post
    Try another USB
    If not
    Try to format HDD and altboot with 71.xxx.xxx
    Firmware if all ok upgrade to 72.xx
    Then to 73.xx
    How can I format the HDD when I can't access the user interface? If I let the machine boot normally, it says "Device unavailable" now, and continues to reboot again, and again. I can only get the 72.xxx.xxx version. I'll start with that.

    Nevertheless, I am going back to that machine later, if anyone has any more ideas, your help is beyond appreciated.


  7. #7
    Senior Tech 100+ Posts jhalfhide's Avatar
    Join Date
    Apr 2015
    Posts
    227
    Rep Power
    10

    Re: WC 5865i Firmware upgrade

    Sounds like SD Card or HDD has gone. Itís the same with that whole connectkey range. I usually order both, do SD Card first and HDD next. Keep what you donít use in stock.


    Sent from my iPhone using Tapatalk


  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Oct 2014
    Posts
    92
    Rep Power
    0

    Re: WC 5865i Firmware upgrade

    Quote Originally Posted by JLSam View Post
    My USB does have an activity light. You can see it there on the picture. The machine was able to copy, but it did not print, for any computer, or any internal configuration reports. Thanks for the comment on the firmware, I was asking myself why Xerox Helpdesk would ask me to use a different firmware. So your comment puts my mind at ease.



    How can I format the HDD when I can't access the user interface? If I let the machine boot normally, it says "Device unavailable" now, and continues to reboot again, and again. I can only get the 72.xxx.xxx version. I'll start with that.

    Nevertheless, I am going back to that machine later, if anyone has any more ideas, your help is beyond appreciated.
    To format HDD take it off connect the HDD to pc and format
    When problem with SD you will get a white screen


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here